The damaged section must be located and exposed carefully, with the irrigation supply shut off and the line depressurized. The right fitting depends on pipe material and location.
Before exposing an underground pipe
Stop watering the affected zone and mark the wet area. Before any excavation, follow DigAlert’s 811 process and wait for the required utility responses. Utility marking does not locate every private irrigation line. Water can travel through soil before surfacing, so the visible puddle is not always directly above the break.
Inspection and repair steps
- Isolate the line and locate the leaking segment.
- Excavate carefully, remove damage and fit compatible pipe and connectors.
- Flush, pressure-test, backfill and check every head on the zone.
Read about irrigation leak detection and pipe repair or browse sprinkler and drip irrigation services.
Watering and maintenance resources
UC ANR recommends routine checks for leaks at heads and connections. Rancho Water’s use tools can help a district customer see whether water use changed after a repair.
Cost and next step
The repair cost depends on the fault, replacement parts, access and any digging or restoration needed. Ask for the proposed scope and estimate before work begins. Our sprinkler repair cost guide explains the main factors.
Related homeowner questions
- Why Are Two Sprinkler Zones Running Together?
- Can You Repair Rain Bird or Hunter Sprinklers in Temecula?
Sources: UC ANR landscape water conservation Q&A · Rancho Water bill, rates and water budget · EPA WaterSense sprinkler tune-up.
Schedule sprinkler service
Tell us the symptom, when it occurs and which zone is affected. We can discuss the inspection and repair options for your Temecula or Murrieta area property.
Call (951) 252-4822